---
title: "Display links and TV mode"
url: https://docs.corefinity.com/guides/dashboards/display-links-and-tv-mode
type: guide
last_updated: 2026-11-13
feature: dashboards
---
# Display links and TV mode

Show a dashboard on a wall screen, from your own browser or through a link that needs no sign-in.

## Before you start

- TV mode works in any browser where you are signed in.
- A display link needs two-factor sign-in on your account: see [Two-factor](/guides/your-account/two-factor).
- A display link shows the dashboard as you see it, except the widgets in the table at the foot of this page.

## Use TV mode

1. **Turn it on**

   Open the dashboard's **…** menu, beside **Undo**, and choose **TV mode**. The menu and the editing controls go, and the dashboard fills the window.

   _Screenshot: A dashboard in TV mode: the name Overview, Last 7 days and the time it was updated, a clock, and the buttons Full screen and Exit TV mode, with the widgets filling the window and no menu._

The widgets keep updating while you stay signed in. **Full screen** hides the browser's own bars, and **Exit TV mode** brings the menu back.

If the screen reads **Signed out. Sign in on this screen to resume**, sign in again.

## Create a display link

1. **Open display links**

   Open the dashboard's **…** menu and choose **Display links…**. The list shows each link for this dashboard, when it expires and when a screen last used it.

2. **Describe the screen**

   Enter where the screen is in **Label**, and choose **Expires in** (7, 30, 90 or 365 days) and a **Light** or **Dark** theme. Enter a new **Code from your authenticator app**, then choose **Create link**.

   _Screenshot: The Display links dialog: the link Office wall screen marked Active with its expiry and last use and a Revoke button, then Label holding Support room screen, Expires in at 90 days, the Dark theme and the code box, the count 1 of 5 for this dashboard, and the buttons Close and Create link._

3. **Copy the link**

   Choose **Copy**, then **Done**. The link is shown once, so copy it before you close the dialog.

Open the link in the screen's browser, in full-screen or kiosk mode. A dashboard can have 5 active links, and you can have 20 across all your dashboards.

> **Warning:** Anyone with the link can see the dashboard. Treat it like a password.

## Revoke a display link

1. **Revoke it**

   Open **Display links…**, choose **Revoke…** beside the link, then **Revoke link**.

Screens using the link stop showing the dashboard at their next update. A link also stops for good when it expires, when its dashboard is deleted, and when you change your password, turn off or reset two-factor, or move to another organisation.

## What a screen never shows

| Where                      | Widgets never shown                                                                                                                                                            |
| -------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
| A display link             | The 5 **Billing** widgets, **Partner level**, **Getting started**, **Demo**, **Migrations**, **Deploy time**, **LogsQL chart**, **Top paths and messages** and **Log viewer**. |
| A display link and TV mode | **Traffic**.                                                                                                                                                                   |

In its place the widget reads **Not shown on display links** or **Not shown in TV mode**.

## Related

- [Home dashboard](/guides/dashboards/home-dashboard): Make, rename and delete dashboards.
- [Time range and scope](/guides/dashboards/time-range-and-scope): Set the period and what widgets cover.
- [Two-factor](/guides/your-account/two-factor): Set up a second factor on your account.
